Our products are delivered worldwide through our subsidiaries and sales offices and our comprehensive distributor network. You’ll find the contact information to your nearest Kytola contact here.
If you do not find what you are looking for, please contact our headquarters.
We are open to discuss distributorships in regions where we still do not have a Kytola representative. Contact our global headquarters for more information.
The minimum we need to know is the flowing medium, normal operating / max. flow rate, pressure and temperature.
Read the flow rate on the scale at the highest and widest point of the float. See detailed instructions for different float types here.
A variable area type flow meter shows correct readings only when the operating conditions equal the meter design values which are marked on the scale.
For other operating conditions a conversion factor is required. For gas flow conversions please see further information here.
For other media conversions, please contact Kytola for further instructions.
Standard Kytola models for air are designed for normal air pressure and +20°C temperature.
They are suitable for example for an air purging application where the flow meter outlet is to a free air pressure and the temperature is normal room temperature.
We can offer customer-specific tailor-made scales for other operating conditions. Please contact Kytola for further information.
Yes, we can modify the scale for any standard flow unit. Please specify the required flow unit when inquiring our products.
Variable area type flow meter needs to be always installed vertically and the flow direction is from the bottom to the top.
See these pictures for different installation possibilities here.
No, in case the flow meter is used under conditions that it is designed for, it does not require a regular calibration.
Yes, spare parts are available for all Kytola products. You’ll find our contact information here.
When ordering spare parts it is very important to have and inform us about the complete product model code the spare part is for.
The only maintenance needed under normal conditions is cleaning.
Clean the outside surfaces of the meter using soap water and a soft brush or a cloth.
CAUTION: Do not use solvents or alcohol-based detergents as they may damage the flow meter parts.
Replace damaged parts without a delay.
The model code is clearly marked on all Kytola products.
On Kytola flow meters the model code is on a scale plate, on a flow meter body or on a name plate.
In some rare cases the model code may be lost due to for example missing parts.
Please email us detailed pictures and other possible information such as process details to help us identify the specific product.
Kytola Instruments Oy
P.O. Box 5
Olli Kytölän tie 1
FI-40951 Muurame
Finland
frequently-asked-questions-and-answers
frequently-asked-questions-and-answers
frequently-asked-questions-and-answers
frequently-asked-questions-and-answers
Please select your country to browse in your own language and local units.
